2.4
Fitting the condensate drain (standard
design)
1. Remove front cover (1a, Fig. 13). Release lateral
locking bolt (1) (turn approx. ¼ turn to the left and
pull out as far as the stop). Lift the front cover straight
upwards and remove towards the front.
1
1a
Fig. 13
2. Remove base plate (2, Fig. 14). Lift the base plate
straight upwards and remove it.
3. Screw siphon (3) on the condensate tray (4) and
tighten securely (connection must be sealed)
4.
Slide the siphon support (3a) under
the siphon.
2
3
5
5a
4
3a
Fig. 14
5.
Fit drain (5) on siphon (3) and lead it outwards (op-
tionally left or right side) through the aperture (5a).
6. Fit connecting line (5) to the drain line (2m hose en-
closed with the boiler).
7. Reattach front cover (1a, Fig. 13) and base plate (2,
Fig. 14).
Before commissioning the siphon must
be filled with water in order to prevent flue
gas leakage.
The condensate drain must be made of
corrosion-resistant material.
10
4 210 255 / 02
ASSEMBLY
Summary of Contents for UltraOil 16
Page 49: ...49 4 210 255 02...
