3.2 Operating modes
A room temperature controller with or without a timer regulates the operation of
the unit.
EasyTronic EC
The EasyTronic EC is a room temperature controller with a timer. A maximum of
10 TopVent
®
units can be connected to 1 controller.
Function
■
Recording the room temperature with the integrated temperature sensor
– Optional: Recording the room temperature with the external temperature
sensor
■
Room temperature control in on/off mode: If the room temperature falls below
the setpoint value, the connected TopVent
®
units switch on. Upon reaching the
setpoint value, the units switch off again.
■
Lowering of the room temperature setpoint value via week programme
■
Controlling the TopVent
®
units using a door contact switch: The connected units
are switched on via door contact if the door is open (digital input).
■
Adjusting the fan speed: The required speed can be infinitely adjusted.
■
Pump or valve control: The EasyTronic EC provides a signal for switching a
pump or a valve (digital output).
Fig. 2: EasyTronic EC room temperature controller
EasyTronic EC
Power supply
110…230 V AC, ±10%, 50/60 Hz
Power consumption
max. 1.3 W
Temperature range
0...50 °C
Dimensions (W x H x D)
128 × 80 × 56 mm
Protection rating
IP 30, class 2
Installation
In a flush-mounted box (spacing between mounting holes
83.5 mm) or on the supplied base
Table 1: Technical data EasyTronic EC
Room temperature sensor ET-R
Temperature range
- 30...+ 70 °C
Dimensions (W x H x D)
93 × 70 × 46 mm
Protection rating
IP 65
Installation
in plastic casing for wall mounting
Table 2: Technical data EasyTronic EC
6
TopVent
®
TV
Design, installation and operation
Construction and operation
4 216 284-en-05
