Installation EasyTronic EC
■
Follow the installation instructions included.
Installation EasyTronic TV
■
Install the room temperature controller:
– In the occupied area, at a height of about 1.5 m
– Not near sources of heat or cold (windows, doors, machines, etc.)
– Protected from sunlight
■
Detach the casing base (e.g. using a screw driver).
■
Break through the casing base along the perforation.
■
Insert the cables through this opening.
■
Connect the cables to the connectors.
■
Screw the base onto a flush-mounted box (60 × 60 mm).
■
Place the device on the base.
■
Set the slide switch to the 'A+T' position.
A
A+T
0
Fig. 10: Opening the casing
Fig. 11: Installing the EasyTronic TV
Fig. 12: Position of the slide switch
16
TopVent
®
TV
Design, installation and operation
Transport and installation
4 216 284-en-05
