Hoval TopVent GV, Operating Instructions Manual, Page: 20 / 44

8 Transport and installation
Caution
Risk of injury from incorrect handling. Transport, assembly and installation
work may only be performed by specialists. Observe safety and accident
prevention regulations.
8.1 Scope of delivery
The scope of delivery includes:
■ TopVent ® unit
■ Accessories (flue gas duct, installation material, temperature sensors)
■ Optional components
1 2
■
1
TopVent
®
unit
■
2
Zone control panel
Fig. 10: Delivery of the components on pallets
Accessories
The following accessories are supplied separately:
■ Fresh air temperature sensor and room air temperature sensor (in the zone
control panel)
■ Installation material (in the Air-Injector)
■ Flue gas duct
Options
The following optional components are supplied separately:
■ Additional room temperature sensors (in the zone control panel)
■ Zone control panel C-SYS
■ Room temperature controller TempTronic MTC
Preparation
■ Use a forklift with a sufficiently long fork to unload (at least 1.3 m).
■ Check the consignment against the delivery documents and the order
confirmation to ensure that it is complete. Report missing parts and any
damage immediately in writing.
8.2 Storage
If you do not install the unit immediately:
■ Remove the packaging film to avoid water vapour condensation.
■ Store the unit in a dry, dust-free room.
■ Keep the storage temperature between – 30 °C and + 50 °C.
■ Avoid too long storage periods. After a storage period of more than 1 year:
– Check that the bearings of the fans move smoothly before installing the unit.
20
TopVent ® TG | GV | MG
Operating instructions
Transport and installation
4 220 656-en-03 4 220 656-en-03