10
Advanced User Instructions
430294ENG-Jun02
Language
The room station is programmed in three
languages English, German and French. To
change the language press or key
for 5 seconds. Once the language appears the
keys can be used to change languages.
or
Works setting: ENGLISH
The previous display will return in a few
seconds.
1 - Clock setting
The following functions can be set:
-
Time (minutes, hours)
-
Day
-
Month
-
Year
The clock can be set to automatically change
over from summer to winter time by a parameter
in the service level of the central unit.
Changing clock settings
The clock can be changed by using
key
and then the and keys to increase or
decrease the values.
-
Time
Change with:
to increase
to decrease
Setting Range:
00:00 … 23:59
-
Date
Change with:
to increase
to decrease
Setting Range:
1 … 31
-
Month
Change with:
to increase
to decrease
Setting Range:
1 … 12
-
Year
Change with:
to increase
to decrease
Setting Range:
1995 … 2030
- Return to default display
If the
key is not pressed the default display
will return after 2 minutes. It is possible to return
to the default display at any time using the
information key.
2 - Time clock level
In the time clock level the individual program
times can be customized. Standard heating
programs 1, 2 and 3 can be called up as desired
and overwritten with different switch times and
temperatures. Each standard program can thus
be configured individually and stored under the
same program number so that three different
programs are available on demand. These can
then simply be called up in the user operating
level see page 6 for setting of the automatic
program.
Note: Programming of room temperatures is only
possible if the relevant parameter has
been enabled in the service level by an
engineer.
If this has not been done it is only possible
to change the on / off times. In this case
the room temperature will be the works
setting of 20ºC or the corrected value
which has been set in the user level.
The standard programs are lost when
overwritten by customized programs.
These are cancelled after a reset and
replaced by the standard programs and
therefore have to be recreated if needed.
