4.3 Programming the weekly calendar
The weekly calendar is used to define regular weekly switching times and
operating modes. You can enter up to 50 switching points.
Notice
If both supply air units and recirculation units are installed in a plant, the
weekly calendar applies for supply air units. The recirculation units are
switched on depending on heat or cool demand.
Example:
The following operating modes are to be switched:
Day
Time
Operating mode
Mo – Fr
06:30
SA2
Mo – Fr
17:00
ST
Precondition: The
User
operator level is active (password entry see section 2.6).
O
verview i 01/01
ZONE Mode SA2
REMU 01 02
RECU 61 62
10:18 ! 28.07.17
■
In
Overview
(with the cursor on the '
O
')
press the key.
■
The
Main menu
appears.
Main menu 3/5
Overview
Operating menu
Weekly calendar
Date/Time
Logout
■
In
Main menu
, navigate to '
Weekly
calendar
' with .
■
Confirm with
.
Weekly calendar 0/00
IDX Day Time Mode
New Mon 00:00 ST
■
In
Weekly calendar
, navigate to the day
with .
■
Set the value '
Mon
' with .
■
Navigate to the hour with .
■
Set the value '
06
' with .
■
Navigate to the minute with .
■
Set the value '
30
' with .
■
Navigate to the operating mode with .
■
Set the value '
SA2
' with .
■
Save the switching point with .
Weekly calendar 0/05
IDX Day Time Mode
New Tue 06:30 SA2
01 Mon 06:30 SA2
02 Tue 06:30 SA2
03 Wed 06:30 SA2
04 Thu 06:30 SA2
05 Fri 06:30 SA2
■
Navigate to the day with .
■
Set the value '
Tue
' with .
■
Save the switching point with .
In the same way, enter the switching points
for Wednesday to Friday.
13
TopTronic
®
C
System control for TopVent
®
Operating examples
4 216 689-en-01
