Hoval Max-3, Operating Instructions Manual

Page: 51 / 88

HEATInG SySTEM COnTROL
51 4 213 563 / 03
5.11 Hot water
Like in the area of the heating circuits, it is also possible
to work with basic, week and day programs for hot water.
The hot water programs that can be selected are inde-
pendent from the heating circuit. Bear in mind that you
have to activate each of the basic, week and day pro-
grams of the hot water separately (5.7.6 page 25) and
edit them (5.12.6 page 63, no. 1).
There is no synchronisation of the hot water
temperature during the joint operating mode
(5.7.8 page 27).
5.11.1 Hot water operating elements
1
8 7
2
3
4
5
6
9
No. Designation Function
1 Hot water circuit
Display of the hot water circuit to be edited. Changes to the menu item
are only stored in the selected hot water circuit. Use the down arrow ( )
to switch to another hot water circuit in the heating system.
2 Hot water temperature Represents the hot water temperature desired in the particular switching
cycle. The hot water temperature can be changed in the active switching
cycle using plus ( ) and minus ( ). (→ page 26)
3 Basic program Selection of the basic program. Use the down arrow ( ) to select a new
program for editing.
4 Day program Active day program in the week program. Use the down arrow ( ) to
change the day program.
5 Switching cycles Graphical display of the currently selected day program with all time
cycles and corresponding temperature specifications. The time period
marked in yellow shows the active cycle in which the water temperature
can be changed with plus ( ) and minus ( ).
6 Time of day Displays the current time.
7 OK Save ( ) the changes in the selected hot water circuit and return to the
previous screen
8 Help No function is available at present
9 Back Used as a button ( ) for returning to the main menu.