Hoval Max-3, Operating Instructions Manual, Page: 27 / 88

HEATInG SySTEM COnTROL
27 4 213 563 / 03
5.7.7 Call up system information
1
Touch the Info ( ) button to select it.
Also use the Main menu ( ) > Info (page 2) to access the
overview of the system information (5.12.2 page 59, no. 2).
2
The Info menu item is displayed. Information for each system area can
be called up here. To do this, use the horizontal arrows ( ) to select the
corresponding areas. Use the Back ( ) button to exit the menu item.
The start screen appears again.
5.7.8 Joint operation for heating and domestic hot water circuits
If your system has several heating circuits (e.g. apart-
ments), the TopTronic
®
E control module offers the “Joint
operation of all heating and domestic hot water circuits”
function. For the same operating mode to be set for all
heating and hot water circuits (max. 28 circuits), it is ne-
cessary for the “Joint operation of all heating and dome-
stic hot water circuits” checkbox to be activated (5.7.3
page 23, no. 2). The room temperature, the day pro-
gram and the basic program are thus changed at the
same time in all circuits.
Programs are controlled as follows in joint operation:
Temperature Synchronisation exclusively in the heating circuits
There is no synchronisation of the hot water and the heating circuit
temperatures during the joint operating.
Basic programs
Synchronisation in the heating and hot water circuits
Day programs Synchronisation exclusively in the heating circuits
“Special day programs”
(Party and Absent)
Synchronisation in the heating and hot water circuits