4 215 415 / 02
7
Subject to modifications
• If the comfort ventilation unit is located in an
unheated room, the supply and extract air lines
must thermally insulated.
• The ducts must be leak-tight.
• Check the supply air outlets for dirt build-up and
clean them if necessary.
• Extract air points must be free and clean.
• The fresh air intake must be clean and
unobstructed.
•
The filters must be clean.
• The HomeVent
®
comfort ventilation unit must be
connected to the mains.
• Electrical connecting lines must be intact.
• The comfort ventilation unit must be inspected and
serviced regularly. The cleaning and maintenance
intervals depend to a great extent on the running
time and the degree of contamination in the ambient
air (e.g. dust, traffic etc.).
• The HomeVent
®
operator terminal must be
connected to the comfort ventilation unit.
6.2
Switching on
• Connect the mains plug of the HomeVent
®
comfort
ventilation unit to the device and in the socket.
• Set the operator terminal to the desired operating
mode.
7 Maintenance
The comfort ventilation unit must be inspected and ser-
viced regularly. The cleaning and maintenance intervals
depend to a great extent on the running time and the
degree of contamination in the ambient air (e.g. dust,
traffic etc.).
i
Thorough cleaning of the HomeVent
®
Comfort ventilation unit by Hoval Cus-
tomer Service or an installer trained by
Hoval.
i
Conclude a service agreement with Ho-
val, and your HomeVent
®
comfort ven-
tilation unit will be serviced regularly by
Hoval Customer Service.
7.1
Supply air an extract air filter
Caution:
Do not operate the comfort ventilation unit
unless the filters are fitted!
i
Replace the filters after the pollen season
if you have a pollen allergy.
7.1.1 Filter soiling
The supply air and extract air filters are time-monitored.
The end of the set operating time is displayed on the
operator terminal. The filter replacement interval can be
adapted to local conditions.
• Operator terminal BG02E:
Operating mode display LED lights up orange.
• TopTronic E
®
room control module comfort plus:
operating mode display LED lights up orange and is
supplemented by a warning triangle on the display.
COMMISSIONING AND MAINTENANCE
