11
4 220 456 / 02
IMPORTANT NOTICES
2.1.4 Set-up of UltraGas
®
2 (190-1550)
1. Remove climbing aid (1).
1
Fig. 06
2. Remove front (2) and rear (3) wooden crossbeam.
4
3
5
6
2
7
Fig. 07
3. Using a winch (4), raise the front of the boiler.
4. Remove both side beams (5) to the front and side
5. Pre-assemble front feet (6) (tighten screws by hand).
6. Using a winch, raise the rear of the boiler.
7. Remove both side beams (5).
8. Pre-assemble rear feet and, if provided, middle (7)
feet (tighten screws by hand).
9. Using a winch, place the boiler on the floor.
10. Tighten the screws of all feet.
!
WARNING
Tip hazard.
Unscrew the feet max. 80 mm.
Summary of Contents for 51-UltraGas 2 1000
Page 65: ...65 4 220 456 02 ...