PD420 Live Lane Setup Step-By-Step Example:
Right click on chart background to access lane setup
context menu.
Then select either “Define new Lane” if no lanes are
present or “Edit Lane(s)…” if lanes have already been
defined and you need to adjust the start/end positions.
Real targets are streaming
by. Setting up lanes is as
easy as drawing around them
on this chart.
Place first boundary around histogram by left clicking the
mouse button, then place second boundary.
Lane is now defined between these two boundaries.
Once stop boundary is defined, lane will fill with gray.
You can also draw around
the built up histograms that
show you where the targets
are occurring.
As you move the boundary location before placing it,
you can see the distance from the radar face. This is
the direct distance from the radar to the target and not
the horizontal distance on the road. Once you place
the lane boundary, it will be rounded to the nearest
foot as lane boundaries can only be specified in
integer number of feet.
