Reading Historical Counts Out Of The Radar:
One the data is read from the radar it is stored as a native .dat file that may be imported
later into the Houston Radar Stats Analyzer and also as a .csv file (in the same folder with
the same name but with a .csv extension) that may be imported into Excel for further
analysis.
Once you connect to the radar,
these buttons will become
active and you can use them to
erase the stats log memory, set
the time in the radar and reads
historical lane-by-lane counts
from the radar memory.
Ensure the stats package
says “Enabled”. If not, then
contact Houston Radar for a
firmware upgrade as older
versions of the firmware did
not support saving historical
logs of lane-by-lane counts.
