ENG
8
How to use
The floor scale is intended for use in measuring your body weight. Select an
appropriate place to set the scale. i.e. dry, flat and slip-proof surface prevent
-
ing from the scale’s inaccurate operation.
•
Get the scale out of packing, remove the labels preventing from the ap
-
pliance’s accurate operation.
•
Open the battery compartment cover and remove the safety film
wrapped around batteries. Install the batteries of CR 2032 type strictly
observing the polarity (see “Battery replacement” section), then close
the battery compartment cover.
•
To set the measuring unit use the button (3) located on the back of
the unit. Pressing the button (3) will switch between the kilograms (kg),
pounds (lb) or stones (st).
•
The scale will automatically turn on when you step on it.
•
Step on the scale and stand still while weighting yourself. Immediately
leave the scale to avoid damaging.
•
The scale will display your weight in about 10 seconds, and then the
scale will automatically turn off.
Recommendations
•
Weigh yourself at one and the same time of a day.
•
Weigh yourself in at least 2-3 hours after a meal.
•
Put the scale at one and the same place to obtain more accurate results.
Battery replacement
•
Open the battery compartment cover and remove the safety film
wrapped around batteries. Install the batteries of CR 2032 type strictly
observing the polarity, then close the battery compartment cover.
•
If the scale is not used for a long period of time, remove the batteries
from the battery compartment.
Warning!
Treat the scale carefully as it is a measuring tool. Do not
drop the scale and do not exceed the scale’s maximum capacity
Cleaning and Maintenance
•
Do not use abrasive or chemical cleaners. Wipe the scale with a slightly
damp clothes.
Storage
•
Store the scale horizontally in a cool place.
Summary of Contents for HT-962-013
Page 14: ...KAZ 14 ...
