Back of beam
B1
A1
A3
1/4-20 Screws (4)
A2
C
B
A
Set-Up Procedure
for
Low-Profile Wheelchair Scale
Beam Type
Model 495/4951
1. Remove all packing materials.
2. Set scale base on a flat, level surface. Slide ramp pins into T-slots on base;
drop pins into the grooves.
3. Remove 4 (1/4-20) screws from the column bracket (A1). Set aside
(to be used on steps 4 and 5).
4. Set column and beam assembly (B) on column bracket
(A1). Be sure the back of the beam is facing the scale
deck (A). Secure column and beam assembly with
4 (1/4-20)screws. Do not tighten the screws.
5. To attach handrail (C), remove 2 (3/8-16) screws from the top
of weighbridge side. Set the handrail on the weighbridge
side, align holes, reinstall 2 (3/8-16) screws and tighten.
