manualshive.com logo in svg

Hotsy EP-2010, Operator'S Manual

Share
Download
Hotsy EP-2010 Operator'S Manual Download Page 5

Hotsy EP  •  8.914-444.0  •  Rev. 07/13

OPERA

T

OR’S MANU

AL

  

PRESSURE W

ASHER

  

6

COMPONENT IDENTIFICATION

Pump 

— Develops high pressure.

Spray Gun

 — Controls the application of water and 

detergent onto cleaning surface with trigger device. 
Includes safety latch.

Wand

 — Must be connected to the spray gun.

Unloader

 — Safety device that relieves pressure when 

spray gun trigger is closed.

High Pressure Hose

 — Connect one end to water 

pump discharge nipple and the other end to spray 
gun.

Pump Protector 

— Cycles fresh cool water through 

pump when recirculating water reaches 140°F.

GFCI

 — Ground fault circuit interrupter trips when 

voltage leaks to ground.

Note

:

 If trigger on spray gun is released for more 

than 1-2 minutes, water will leak from valve. Warm 
water will discharge from pump protector onto 
fl oor. This system prevents internal pump dam-
age.

Spray Gun 

and Wand

High Pressure 

Hose

Pump

Pressure 

Nozzle

Garden Hose 

(not included)

Unloader

Detergent 

Bucket (not 

included)

Water Supply

(not included)

Wand 

Hanger

Quick 

Coupler

On/Off

Switch

GFCI

Pump 

Protector

Soap 

Nozzle

Safety 

Latch

Summary of Contents for EP-2010
























Reviews:

No comments

Brands by name

Popular brands

Load more brands