6
1800 SERIES PRESSURE WASHER
OPERATOR’S MANUAL
Hotsy 1800
•
97-6244
Rev. 7/06
assemblY
unpacking
Unpack carefully. Wear safety glasses or goggles while un-
packing, assembling or operating pressure washer. If there
are missing components or hidden damage immediately
contact distributor or carrier concerning discrepancies.
1. Unbolt pressure washer from pallet.
2. Remove pressure washer from pallet.
parts included
•
Pressure Washer
•
Pressure Hose
•
Hose Hanger
•
Wand
•
Operating Instructions and Parts Manual
tools required
•
10" Adjustable Crescent Wrenches (2 ea.)
•
Teflon Tape
•
Blade Screwdriver
pressure hose, Wand and Wand holder
1. Use teflon tape on plumbing connections to prevent
leakage.
2. Install pressure hose on machine as shown in
figure 1.
Figure 1 - Installing Pressure Hose
Figure 2 - Assembling Wand Components
pressure hose
thermal
rupture disk
Quick disconnect plug
Wand
Quick
disconnect
trigger Gun
pressure hose
3. Assemble wand components as shown in
figure 2.
Connect pressure hose to trigger gun.
NOTE: The nozzle is not to be installed at this time.
4. Make sure that all plumbing connections are tight.
hose hanger
1. Install the hose hanger on the machine coil tank as
shown in
figure 3
.
Gas valve
1. Install gas valve on machine as shown. (Plastic cover
should point upwards).
Figure 4 - Installing Gas Valve
Figure 3 - Hose Hanger Installation
hose hanger
pocket on
coil tank
