Hotronix Sport Ball Heat Press Manual / 2016-09-28a / pg 3 of 4
Adjusting Temperature, Time and Pressure
Press the MODE button to cycle through setup modes (with the press ON and the Lift Handle in the UP position):
Various transfer products will recommend using either “light,” “medium” or “heavy” pressure. Some trial and error may
be required to determine the best pressure setting, but once selected your Sports Ball Heat Press will reliably reproduce
the same pressure, print after print.
Place ball on Ball Mount
Rotate adjustment handle counter-clockwise to unlock spring-
loaded Ball Mount
Move Ball Mount up or down to achieve desired print pressure
Rotate adjustment handle clockwise to lock Ball Mount in place
For best results, compress the ball only as wide as the print area
Recommended Transfers and Substrates
Selecting suitable materials is very important for a durable and attractive final result. Products known to work reliably
with the Sports Ball Heat Press include but are not limited to:
Transfer Products:
CAD-CUT® Super Film™
CAD-CUT® 3M™ Scotchlite 5807
CADCOLOR materials
Basketballs (use flex pad for 2
nd
hit):
Wilson Evolution Game
Basketball
Wilson Solution Game Basketball
Crowell Indoor Basketball
Markwort MB4 Basketball
Footballs:
Wilson GST Autograph Football
Wilson WX Autograph Football
All White
Volleyballs:
molten Recreational Volleyball
Tachikara Institutional Quality
Composite VolleyBall
Wilson SAND Collegiate
Volleyball
Soccer Balls
adidas Conext15 Top Glider
Epic Premium Practice Soccer Ball
Mikasa Serious Soccer Ball
Nike Aerow Team Ball
Wilson NCAA Forte FYbrid
Wilson Traditional Soccer Ball
WARNING:
Genuine leather and
soft synthetic inflatables are not
recommended.
Displays current
temperature (
°
F)
Ready to Print
Displays print temperature
Increase using (+) button
Decrease using (–) button
Displays print time (sec)
Increase using (+) button
Decrease using (–) button
