Hotpoint ULTIMA FDW80, Service Information, Page: 3 / 28

3
TECHNICAL SPECIFICATIONS
General Model Colour Commercial Code
FDW80 P - Polar White 33187
FDW80 T - Sandstone 33188
FDW80 G - Graphite 33189
FDW85 A - Aluminium 33190
Country of Origin Italy
Energy Class A
Washing Class A
Drying Class A
Noise Level 46 dB
Dimensions Height 850 mm
Width 595 mm
Depth 570 mm
Weight 46 kg
Capacity 12 place settings
Electrical Supply 230/240 Volts AC @ 50Hz
Energy Consumption 2.15 kW
Drying Condenser Turbo Drying (before Serial Number 50214.0000)
Controls Electronic 100 bit with Relays for Heater & Circulation Motor
Tub Stainless Steel
Heater Flow through type with built in safety cut out
Wattage 2 kW @ 230V
Resistance 26.50
Ω
Circulation Motor Capacitor Run Induction Motor
RPM 2800
Power Consumption 45 Watts
Start Winding Resistance 67
Ω
Run Winding Resistance 94
Ω
Capacitor 5 uF
Detergent Dispenser Capacity 25 g + 5g
Rinse Aid Dispenser Capacity 140 ml
Water Softener Salt Capacity 2 kg
Standard cycle water consumption 18 Litres
Standard cycle energy consumption 1.05 kW/h
Standard Cycle Time 120 minutes approximately
Fill Valve Resistance 4 K
Ω
Regeneration Valve 3.7 K
Ω
Drain Pump Plaset Motor Synchronous
Motor Winding Resistance: 200
Ω
Power Consumption: 28 Watts
Alternating Wash Valve Motorised Diverter Valve
Thermistor Door Mounted
Indicator Lamps Mains On/Off, Low Rinse Aid, Programme, Extra Dry,
Wash Progress, Delay, Low Salt, Half Load, Water Leak
Wash Programmes 8
Wash Temperatures 40°C, 45°C, 50°C, 55°C, 60°C, 65°C, 70°C