9
GB
Wash cycles and options
Table of programmes and wash cycles
Wash options
!
If the selected option is not compatible with the set
wash cycle, the indicator light will flash and the option
will not be activated.
Prewash
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.:
Put the detergent in the relevant compartment.
W
ash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual dam-
pness%
Energy con- sumptionkWh
Total water lt
Cycle duration
Pr
ewash
W
ash
Bleach
Fabric
softener
CLEAN Plus
1
Anti Stain
40°
1200
-
4
-
-
-
180’
2
Anti Stain Quick
40°
1200
-
-
3,5
-
-
-
60’
3
Whites
60°
1200
-
4
-
-
-
180’
4
Cotton Standard 60°C
(1):
heavily soiled whites and resistant colours.
60°
(Max. 90°C)
1200
(3)
7 53 0,94 52,5 160’
5
Cotton Standard 40°C
(2):
lightly soiled resistant and delicate colours.
40°
1200
-
7 53 0,93
77
140’
6
Synthetics:
heavily soiled resistant colours.
60°
800
3,5 44 0,93
47
115’
6
Synthetics (4):
lightly soiled resistant colours.
40°
800
3,5 44 0,57
46
100’
SPECIALS
7
Anti allergy Plus
60°
1200
-
4
-
-
-
195’
8
Anti allergy Delicate
40°
1200
-
4
-
-
-
195’
9
Wool:
for wool, cashmere, etc.
40°
800
-
-
1,5
-
-
-
70’
10
Delicates
30°
0
-
-
1
-
-
-
80’
ECO
11
Cotton Standard 20°C:
lightly soiled resistant and delicate colours.
20°
1200
-
7
-
-
-
170’
12
Eco Cottons
Cold Water
1200
-
-
7
53 0,17
6�3
80’
13
Eco Synthetics
Cold Water
800
-
-
3
48 0,07
30
70’
14
Eco Fast 30’
Cold Water
800
-
-
3
71 0,04
34
30’
Partial Programmes
Rinse
-
1200
-
-
-
7
-
-
-
36’
Spin and Pump out
-
1200
-
-
-
-
7
-
-
-
10’
Pump out only *
-
OFF
-
-
-
-
7
-
-
-
3’
1) Test wash cycle in compliance with regulation 1061/2010: set wash cycle 4 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
60°C . The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with regulation 1061/2010: set wash cycle 5 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at
40°C . The actual washing temperature may differ from the indicated value.
3) At 60 °C the “Prewash” function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle 6 with a temperature of 40°C.
* If you select programme
and exclude the spin cycle, the machine will drain only.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
