1
4
GB
595 mm.
595 mm.
24 mm.
545 mm.
5 mm.
567 mm.
23 mm.
593 mm.
45 mm.
558 mm.
547
mm
. m
in.
I
nstallation
560 m
m.
45 mm.
Before placing your new appliance into operation
please read these operating instructions carefully.
They contain important information for safe use, for
installation and for care of the appliance.
Please
k
eep these operating instructions for future
reference. Pass them on to possible new owners of
the appliance.
P
ositionin
g
Keep pac
k
aging material out of the reach of
children.
It can become a cho
k
ing or suffocation
hazard.
see Precautions and tips
).
!
The appliance must be installed by a qualified
person in compliance with the instructions provided.
Incorrect installation may cause harm to persons,
animals or may damage property.
F
ittin
g
t
h
e
a
pp
lian
c
e
Use the appropriate cabinet to ensure that the
appliance functions properly.
The panels adjacent to the oven must be made of
heat-resistant material.
Cabinets with a veneer exterior must be assembled
with glues which can withstand temperatures of up
to 100°C.
To install the oven
u
n
d
er
t
h
e
c
o
u
nter
(
see diagram
)
and in a
k
it
c
h
en
u
nit
, the cabinet must have the
following dimensions:
!
The appliance must not come into contact with
electrical parts once it has been installed.
The consumption indications on the data plate have
been calculated for this type of installation.
V
entilation
To ensure good ventilation, the bac
k
panel of the
cabinet must be removed. It is advisable to install the
oven so that it rests on two strips of wood, or on a
completely flat surface with an opening of at least 45 x
560 mm (
see diagrams
).
C
entrin
g
an
d
f
astenin
g
Position the 4 tabs on the side of the oven according
to the 4 holes of the outer frame. Adjust the tabs
according to the thic
k
ness of the cabinet side panel,
as shown below:
thic
k
ness of 20 mm: ta
k
e off
the removable part of the tab
(
see diagram
)
thic
k
ness of 18 mm: use the
first groove, which has already
been set in the factory (
see
diagram
)
thic
k
ness of 16 mm: use the
second groove (
see diagram
)
Secure the appliance to the cabinet by opening the
oven door and putting 4 screws into the 4 holes of the
outer frame.
!
All parts which ensure the safe operation of the
appliance must not be removable without the aid of a
tool.
