20 of 36
Service Manual UK
Indesit
Company
English
CONTROLS BOARD PROGRAMMING for Modules with fixed EEProm
NOTE:
This board does NOT have a physically replaceable EEProm.
Programming a Main Board
There are a number of ways the board can be programmed - some of which are not applicable to
certain markets.
Types of programming:
1.
Handheld Terminal (Not UK)
2.
Emit / Memwriter (UK Indesit Service Engineers)
3.
Smart Reader & Smart Card (certain areas of UK market) see photo below and following page.
PROGRAMMING (Using EMIT)
This machine can be programmed via the Emit, using a USB lead (Part No. C00222800), Hardware
Key (Part No. C00115587) & the Memwriter software.
Smart Card Reader
Smart Card
this card hold the program file
and can only be used ONCE.
Black Hardware Key
USB - Serial Cable
A Hardware Key Pin Repair Kit is
available which contains 5 replacement pins
(order Part No. C00114723).
