GB
9
start-up and use
WARNING!
The oven is provided
with a stop system to extract the
racks and prevent them from
coming out of the oven (1).
As shown in the drawing, to extract
them completely, simply lift the
racks, holding them on the front
part, and pull (2).
!
The first time you use your appliance, heat the empty oven with its door
closed at its maximum temperature for at least half an hour. Make sure that
the room is well ventilated before switching the oven off and opening the
oven door. The appliance may emit a slightly unpleasant odour caused by
protective substances used during the manufacturing process burning away.
!
Turn the control dial to adjust the parameter shown on the display between
the “<” and “>” symbols.
!
To make the setting process easier, keep the knob in position: this will
increase the scrolling speed of the numbers on the display.
!
Each setting will automatically be stored in the appliance memory after 10
seconds.
!
The touch controls cannot be activated if the user is wearing gloves.
!
In order to optimise the cooking performance, when starting the selected
function, product settings will be applied that could cause a delayed start of
the fan and heating elements.
Models are equipped with a system of hinges which allows the door to close
slowly, without the user having to follow the movement through with his/her
hand. To use the system correctly, before closing the door:
• Open the door fully.
• Do not force the closing movement manually.
Switching the oven on for the first time
After connecting the oven to the electricity supply, the first time it is switched
on the user should also switch on the control panel by pressing the
button. The list of languages will appear in the menu. To choose the desired
language, select it using the control dial. Confirm by pressing the
icon.
Once the selection has been made, the display will show the settings menu.
Press the
icon or scroll through using the control dial until you reach the
EXIT command and press the
icon to begin using the oven.
!
After choosing the language in the menu, if the display is not used for another
30 seconds it will automatically revert to programming mode.
setings menu commands
To enter the settings menu, switch on the control panel and press the
icon.
Use the control dial to highlight the individual menu commands.
To modify the setting, press the
icon.
The following parameters are listed in the menu:
LANGUAGE:
select the language shown on the display.
CLOCK:
set the exact time.
TONE:
activate/deactivate keypad tone.
LIGHT:
activate/deactivate the internal oven light during
cooking.
LOGO: activate/deactivate logo on start-up.
GUIDE: activate/deactivate operating tips.
EXIT:
exit the menu.
!
It is possible to exit the settings menu by pressing the
icon.
Control panel lock
!
The control panel can be locked while the oven is off, once cooking has
started or finished and during programming.
The control panel lock can be used to lock the oven door and/or controls.
To activate it, press the
icon and select the desired command by
pressing the control dial:
• NO LOCK: deactivate an active lock;
• BUTTONS: lock the controls.
Confirm by pressing the
icon.
A confirmation buzzer will sound and the
icon will appear on the display.
The lock may be activated while the oven is in use, or while it is switched off.
It can also be deactivated in all the above situations and after the oven has
finished cooking.
setting the clock
To set the clock, switch on the oven by pressing the
icon, then press
and follow the steps described.
1. Scroll through the menu commands using the control dial, select CLOCK
and press the
icon.
2. Adjust the time using the control dial.
3. Once you have reached the correct hour value, press the
icon.
4. Repeat steps 2 and 3 to set the minutes.
5. To exit adjustment mode, press the
icon or use the control dial to scroll
through the menu until you reach EXIT, then press the
icon.
!
The clock can also be set while the oven is off, by pressing the
icon
and carrying out steps 2 to 4 as described above.
After the appliance has been connected to the mains, or after a blackout, the
clock will need to be reset.
setting the minute minder
!
The minute minder may be set regardless of whether the oven is switched
on or off. It does not switch the oven on or off.
When the set time has elapsed, the minute minder emits a buzzer that will
automatically stop after 30 seconds or when any active button on the control
panel is pressed.
To adjust the minute minder, proceed as follows:
1. Press the
icon.
2. Set the desired time using the control dial.
3. Once you have reached the desired value, press the
icon again.
When the oven is switched off, the countdown appears on the display. When the
oven is on, the lit
symbol will remind you that the minute minder is active.
To cancel the minute minder, press the
icon and use the control dial to
set the time to 00:00. Press the
icon again.
The
icon will switch off to indicate that the minute minder has been
disabled.
