38
TH-260D1 All in One Heat Pump Manual
Large amounts of water going into drain
It can be expected to have 5-10 L of water drain from the unit via the condensate
drain or the TPR valve while the units running. If more than 10 L is being drained in a
day, contact the plumber who installed the unit to check all relief valves.
Changing the Hot Water Temperature
All hot water systems must have a tempering valve which will set the water tempera-
ture at hot water outlets to 50-55°C. Changing the water temperature setting on the
unit will not result in hotter water at the outlets. If this is required, discuss with the
plumber who installed the unit for possible solutions
Low Hot Water Pressure
The water pressure at the taps is dependent on the incoming water mains pressure
and any tempering or pressure reducing valves installed by the plumber. The
TH-260D1 does not affect the water pressure. If the hot water pressure is
significantly lower than the cold water pressure at the taps, contact the plumber who
installed the system.
Function Parameters
To obtain the list of function parameters, please scan the QR code and fill out the
form. To enter the parameter interface, press and hold the button
for 3 seconds.