34
TH-260D1 All in One Heat Pump Manual
6.
Press the CLOCK button to switch to the next heating
period. The “1” and “OFF” icons will fade. The “2” and
the “ON” icons will light up, indicating that you are
setting the start time for heating period 2.
7.
Repeat steps 3 to 5 to set heating period 2. Press the
CLOCK button to set period 3. Repeat steps 3 to 5 to
set heating period 3
8.
When finished, press the ON/OFF button once to final-
ise the TIMER mode. The “clock” and “ON” or “OFF”
icons will stay lit, indicating that the unit is in TIMER
Note: Set periods 2 and 3 to start and end at
00:00 if you only want one heating period.
NOTE:
The TH-260D1 unit will turn on the heating mode in TIMER mode when the
following conditions are met.
The factory default for
the in-built timer period
is 09:00 – 18:00
For further information
about setting timers,
please contact HWHP