31
TH-260D1 All in One Heat Pump Manual
8.5 Setting the Internal Clock
The TH-260D1 unit relies on the internal clock to operate the TIMER MODE. Please
set the internal clock correctly to ensure the unit operates correctly. Every step will
hold for 5 seconds before returning to the home screen. Note that the time is dis-
played in the 24-hour format. NOTE: The time does not change with daylight savings.
1.
Press the CLOCK button to begin setting the time. The
hour value at the bottom right of the display will start
flashing.
2.
Use the UP or DOWN button to adjust the flashing hour
value to the correct time. (example hour is changed
from “12” to “13) When ready, press the CLOCK button
to toggle to the minute value.
3.
Use the UP or DOWN button to adjust the flashing mi-
nute value to the correct time (time (example minute set
to “34”).
4.
When ready, press the CLOCK button to finish setting
the clock.
If the display time is within the “ON” time periods defined by the TIMER mode,
the ”ON” symbol will be displayed next to the “CLOCK” icon on the display.
If the time is outside “ON” time periods defined by the, the ”OFF” symbol will
be displayed next to the clock “CLOCK” icon on the main display.
For example (using factory default timers):
Time = 09:00 —>
On Time = 19:00 —> OFF