HOT TOOLS PRO SIGNATURE HTST2589UKE Owner'S Manual Download Page 4

Page: 4 / 30

OPERATING INSTRUCTIONS

Automatic Worldwide Dual Voltage
This appliance will automatically adjust to the proper voltage.

Dual Plate Straightener
Includes (4) floating plates that delivers a smooth glide for faster, straighter results. Fewer

Passes. Less Damage.

Automatic Shut-Off
This appliance has an Automatic Shut-Off feature. Should you forget to turn off the iron, it

will automatically shut off after 1 hour.

Plate-locking Switch
For easier storage, the plates of the straightener can be locked together. To engage the

locking switch, first turn the appliance off and unplug it. Push the switch up while pressing

the handles together to lock the plates. To unlock, press the handles together and push the

unlock switch down.
WARNING: DO NOT engage the plate-locking switch during styling, and DO NOT lock the

plates onto hair, as serious damage to hair or even injury could result.

Start-up
• Plug the straightener into an electrical outlet
• Press the Power Button (On/Off) and the LED Temperature Display will start blinking

showing the default setting or the last memory setting.

Adjusting Plate Temperatures:
• Both Left (L) and Right (R) plates, which are labeled for easy reference, can be set at the

same temperatures or adjusted to have one side hotter or cooler than the other.

• Slide the Dual Heater Control Switch to the “L” to set the temperature on the Left plates.
• Slide switch to the “R” to set the temperature on the Right Plates. To set both plates at

the same temperature, move switch to the “LR” position.

Caution: Straighteners with heat controls operate at high temperatures when used on

high settings. When using for the first time, begin with the LOWEST setting. Please read

all instructions carefully before using. For best results, follow these guidelines:

Heat Selection Hair Type
100 °C - 165 °C

For fine, thin hair

165 °C - 193 °C

For normal, medium-textured hair

195 °C - 235 °C

For wavy, thick, coarse hair

Helpful Styling Hints
• Hair should be clean and dried completely before using any styling tool.
• Separate a 2.5 cm section of hair, gently place hair between the Straightening plates

and clamp the straightener down firmly on the hair. You will achieve professional results

if you work from the scalp to the ends of your hair.

• Carefully slide the iron along the isolated section, making sure the hair is heated and

straightened all the way to the ends. The ends will probably require less heat than the

hair which grows closer to the scalp.

• For best results, hold end of hair while smoothing the hair section.
• To create flips or curls, use rounded edge of Straightening Plates to curl ends out or

under.

• To remove hair from the flat iron, release pressure and allow the hair to gently slip out

from the Straightening Plates.

• The straightening process does not require overlapping; separate each section of hair

and work on it as indicated above.

•   Allow hair to cool before combing or brushing.
•   Repeat the process until you have achieved the look you desire.
•   When styling is complete, press and hold the Power Button (ON/OFF) to turn off.

Unplug the appliance and allow it to cool before storing.

USER MAINTENANCE INSTRUCTIONS

SAVE THESE IMPORTANT SAFETY

INSTRUCTIONS

Please read all instructions before using this appliance.
These instructions are also available on our website.

Please visit www.helenoftroy.com/emea-en/
This appliance is intended for household use only.

WARNING: Do not use this appliance near

bathtubs, showers, basins or other vessels

containing water.

This appliance can be used by children aged from

8 years and above, and by persons with reduced

physical, sensory or mental capabilities or lack of