•
The Cork Remover is designed for use with traditional corks, but it may be
used with synthetic corks as well. Synthetic corks are smaller and do not
expand like normal cork so sometimes they may stick on the spiral. If this
happens, hold the cork firmly with a small pair of pliers. Press the Release
Button as normal and allow the cork to be slowly released.
CARE & MAINTENANCE
Wipe the Cork Remover Unit and Charging Base with a soft, dry cloth. Do not immerse
any part of your Cork Remover in water.
To maintain the life of the battery, it is recommended that the unit is run until the battery
is flat and then fully re-charged.
ENVIRONMENTAL NOTE
This symbol on the product indicates that it must not be discarded as general
household waste. Instead it should be handed over to the applicable collection point for
the recycling of electrical and electronic equipment. Disposal must be carried out in
accordance with local environmental regulations for waste disposal.
If you encounter any problems with your Hostess Cork Remover, please contact the
appropriate Service Department. If the Cork Remover was bought in the UK, please
contact:
Hostess Customer Service Department,
Crosslee plc,
Halifax, West Yorkshire,
United Kingdom HX3 8DE
Telephone: 01422 203963
If the Cork Remover was bought outside the UK, please contact your retailer.
