background image

1

 

IMPORTANT SAFETY INFORMATION 

Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury or damage 
to the unit. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING 

Indicates a hazardous situation which, If not avoided, could result in death or serious injury.     

 

CAUTION 

Indicates a hazardous situation which, If not avoided, could result in minor or moderate injury.

NOTICE 

Indicates a hazardous situation which, If not avoided, could result in damage to the unit. 

 

HYGIENE 

Indicates important precautions for hygiene and food safety.

INPORTANT 

Indicates important information about the use and care of the unit.

 

 

WARNING 

The ice maker is a commercial icemaker, and should be destined only to be used for the purpose for which it has been expressly 
designed. 
Any other use should be considered improper and therefore dangerous. The manufacturer will not be held liable or responsible 
for any damage caused by improper, incorrect and unreasonable use.

 

The installation, and relocation if necessary, must be carried out by qualified personnel, in accordance with current regulations, 
according to the manufacturer’s instructions. 
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. 
The use of any electrical appliance involves the observance of some fundamental rules. In particular: 
*Instance of any high humidity and moisture increase the risk of electrical short circuits and potential electric shocks. If in doubt, 

disconnect the icemaker. 

*Do not damage the power cord or pull it in order to disconnect the icemaker from the electrical supply network. 
*Do not touch electrical parts or operate the switches with damp hands. 
*This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a 
person responsible for their safety. 
*Young children should be supervised to ensure that they do not play with the appliance. 
*Do not attempt to modify the ice maker. Only qualified personnel may disassemble or repair the appliance.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for SRM-105A


















Reviews: