10
Cleaning agents must be the food class or a cleanser recommended by the manufacturer.
Some solutions may damage the inner surface of the storage bin or corrode the metal parts. Cleaning liquid must be
cleaned at any time unless otherwise specified by the manufacturer.
[SRM-45/60/80A]
[SRM-105/125A]
Disassembly steps of water spray tube
1. Use tool to unload two
screws of the pump motor,
lift up the pump motor and
bracket, and take down the
pump motor.
2. The motor part of the
pump motor should
not be soaked in the
cleaning agent or
disinfectant.
1. Take ice thickness
sensor off
2. Use the tool to
unload
two
screws.
3. Lift water spray
tube up
1. Disassemble two screws
2. Pull the rubber plug out
3. Pull the rubber plug out
Pump motor disassembly steps
Disassembly steps of ice thickness sensor and water spray tube
1. Take ice thickness sensor off
3. Take drain-pipe up forward
2. Use the tool to unload
two screws
