P400T V2 Portable Beer Disperser
240V / 50Hz
www.lancerbeverage.com
Page 17 of 17
Hoshizaki Lancer reserve the right to change specifications without notice.
Part No: 68000019
Images are for illustration purposes only as product may vary.
041 – 14 November 2014
13. Manufacturer’s Checklist
Checked by
.................................................................................
Date
.............................................................
Gas Charge
..........................................................
Icebank Probe fitted
........................................................
Electrically tested by ................................................. Refrigeration tested by .................................................
TAG No.
............................................................
High temperature probe located on liquid line between coil and receiver / dryer
Compressor wiring connections label affixed, wiring checked and label signed
Refrigeration system final check. Ensure evaporator fully frosts.
Check all tube work for rubbing e.g. discharge line, liquid line, TX capillary.
Agitator blades tight and not touching coils cradle.
Check icebank probe position and tightness.
Coils in cradle correctly.
Clean exterior of unit.
Check body for sharp edges.
Check lid for cleanliness and rough edges. Fit and secure.
Copy checklist & file, put manual/checklist in plastic bag & place in the tank area.
Customer asset No.
W/O ....................................................................
Affix label here
