45
Fig. 9
Door
Hinge
4) Disconnect the silicone hose from the spray tube, and remove the spray tube from
the evaporator bracket.
5) Remove the front separator by pushing the pins inserted into both sides of the
evaporator bracket toward the center. See Fig. 8.
Note: Be careful not to break the pins.
6) The rear separator is hooked on the groove in the evaporator bracket. Remove the
rear separator by lifting it up and down. See Fig. 8.
7) Refit the separators in the reverse order of the removal procedure. Check that the
separators are fit correctly and can swing like a pendulum.
8) Plug in the appliance, then move the control switch to the “ICE” position..
E. Door
1) Open the door.
2) Unscrew and remove the hinges on both sides, and remove the door.
3) Refit the removed parts in the reverse order of the removal procedure. Check that
the door opens and closes smoothly.
Summary of Contents for KM-300BAJ
Page 57: ...56 C Wiring Diagram ...