28
Microswitch
Band
Chute
Spout
Microswitch
Band
Chute
Spout
[m] CHUTE SWITCH (Auxiliary code: D-0 or earlier)
The chute switch consists of a microswitch and a band securing the spout and chute. When
the bin control switch breaks down, the band opens and presses the button on the
microswitch (contacts open) to stop the icemaker (error code: EL).
To restart the icemaker, remove ice from the spout and chute, and move the operation
switch to the “STOP” position, then to the “RUN” position.
Normal Condition
Abnormal Condition
(Band moves and presses microswitch)
[n] SPOUT, SPOUT COVER (Auxiliary code: D-1 or later)
The spout and spout cover are connected
to the evaporator casing with a removable
flange. These are the passage to deliver
ice formed inside the evaporator casing
into the chute. The spout is provided with
a reed switch, ant the spout cover with a
magnet. If the bin control switch goes
wrong and fails to stop icemaking
operation with the bin full, ice pushes up
the spout cover, and the magnet gets
away from the reed switch to stop the unit.
Reed Switch
Spout Cover
Spout
Summary of Contents for FM-300AKE-HC
