Hoshizaki DCM-230FE, Service Manual

Page: 12 / 54

12
II. INSTALLATION INSTRUCTIONS
WARNING
The installation must be carried out by qualified personnel, in accordance with
current regulations, according to the manufacturer’s instructions.
1. UNPACKING
WARNING
Children should not be allowed in reach of the packaging elements (plastic
bags and expanded polystyrene) as they are potential sources of danger.
CAUTION
1. Remove shipping carton, tape(s) and packing. If packing material is left in the
ice dispenser, it will not work properly.
2. Ensure all components, fasteners and thumbscrews are securely in place.
1) After removing the packaging, make sure that the ice dispenser is in good condition. If in
doubt, please do not use the equipment but apply to professionally qualified personnel.
2) Remove the Upper Front, Top and Side Panels to prevent damage when installing the ice
dispenser. See Fig. 1.
3) Remove the package of accessories, and check the contents:
a) Installation Kit
Inlet Hose 1
Outlet Hose 2
1/2-3/4 Nipple 1
3/4-3/4 Nipple 2
b) Bracket 2
c) Fuse 3
4) Check for 10A, 1A and 0.5A spare fuses.
5) Remove the protective plastic film from the panels. If the ice dispenser is exposed to the
sun or to heat, remove the film after the ice dispenser cools.