Hoshizaki DBF-25SAC, Instruction Manual

Page: 24 / 36

21
ENGLISH
CAUTION
The location should provide a firm and level foundation for the dispenser.
NOTICE
Do not place anything to obstruct the ventilation louvers.
IMPORTANT
Normal operating ambient temperature should be within 5°C to 35°C, cooling water temperature within 5°C to 30°C, and beer
keg temperature within 10°C to 30°C. Operation of the dispenser, for extended periods, outside of these normal temperature
ranges may affect production capacity.
Do not install the unit where it could freeze.
Allow the clearance specified for proper air circulation and ease
of maintenance and/or service should they be required.
In some high humidity environments, condensation may form inside the machine and drip onto the floor. Do not install where
the floor can be affected by water.
5. ELECTRICAL CONNECTIONS
WARNING
THIS APPLIANCE MUST BE EARTHED
This dispenser requires an earth that meets the national and local electrical code requirements.
To prevent possible severe electrical shock to individuals or extensive damage to the unit, install a proper earth wire to the dispenser.
Remove the plug from the mains socket before any maintenance, repairs or cleaning is undertaken.
* This appliance requires a separate 220 - 240VAC, 10A supply. The electrical supply must be protected by a suitable circuit
breaker.
* The main control box fuse is rated at 10A and should only be replaced by a qualified service engineer.
* Usually an electrical permit and services of a licensed electrician are required.
* If the supply cord and/or the plug should need to be replaced, it should only be done by a qualified service engineer.
5cm
5cm 5cm
Rear
Left Right