Hortensus BVM-9SPK-850, Operator'S Manual

Page: 15 / 106

www.hortensus.eu
14
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power plug.
Keep the ventilation slots of the tool clean to prevent overheating of the engine.
Regularly clean the tool housing with a soft cloth, preferably after each use.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
11 STORAGE
Never leave material in the blower-vac suction tube or collection bag.
12 TROUBLE SHOOTING
Please check below chart for the observed symptoms to solve problems with your machine
Problem Possible Cause Action
The engine does not
start
The machine is not connected
to the mains
Plug the machines to the
mains.
Damaged cable Take the machine to the
after sales agent. Never
repair the cable with tape.
The machine is not completely
mounted
Mount the tubes and the
catcher.
Damaged switch Take the machine to the
after sales service
The machine does not
blow
The lever of the machine is on
vacuum mode.
Put the lever on the blowing
position.
Ventilator obstructed. Remove the tube and clean
the ventilator.
Tubes obstructed Clean the tubes
The machine does not
vacuum
The lever is on blowing mode. Put the lever on the vacuum
position.
Ventilator obstructed. Remove the tube and clean
the ventilator.
Tubes obstructed. Clean the tubes
If the problem cannot be solved using above chart than please contact your after sales agent.