Introduction
Foreword
Before operating the machine, read the opera-
ting Instructions carefully and follow these. The
purpose of the instructions is to describe how
the DrillManager is operated and its mode of
operation and, thus, to facilitate its use.
As a result, accidents are prevented, repair costs
and downtimes are lowered and the reliability
and service life of your machine and equipment
increased.
Pay attention to the safety instructions!
HORSCH will not accept any responsibility for
any damage or malfunctions resulting from fai-
lure to comply with the operating instructions.
The operating instructions are to be used by
any person working with or on the machine or
responsible for the machine.
Examples:
operation and transport (including prepa-
ration, remedying of faults in the operating
sequence, servicing),
maintenance (maintenance and repair).
The right is reserved to change illustrations as
well as information regarding technical data
and weights in these operating instructions for
the purpose of improving the machine or the
additional equipment.
In accordance with its intended purpose, the
HORSCH DrillManager may only be used to
control and monitor seeders and their compo-
nents and to apply liquid fertiliser.
Any further usage shall be deemed not be in
accordance with its intended purpose.
Warranty claims
Warranty claim forms must be sent through your
local HORSCH dealer to the HORSCH Service
Department in Schwandorf.
It is only possible to process claims which have
been correctly completed and submitted no later
than four weeks after the damage occurred.
Exchange parts, which require the old part to be
returned, are marked with an "R".
Please clean and empty such parts and return
them within 4 weeks, along with a claim form and
an exact description of the fault, to HORSCH.
Exchange parts, which do not require the old
part to be returned. Please keep such parts for
12 weeks until a decision has been made on the
action to be taken.
Warranty repairs, which are to be carried out by
a third party company, or which are expected
to take more than 10 working hours, must be
agreed upon in advance with the Customer
Service Department.
