horsch Avatar 12.20 SW Operating Instructions Manual Download Page 36

Page: 36 / 63

Wings

WARNING

Dropping or lowering machine parts can cause

severe crushing injuries etc.!

No persons may stay under raised machine

parts!

Order persons to leave the danger zone around

the machine. Make sure before folding that no

persons are present in the danger zone.

Comply with the accident prevention instruc-

tions.

WARNING

Risk of accident due to insufficient stability

The machine must not be in an inclined posi-

tion when folding it.

Fold the machine only on a level and firm

surface.

CAUTION

Damages to the machine

Fold the machine only while lifted out.

Before folding clean the area around the

folding joints and the associated hydraulic

cylinders.

Parking

DANGER

Serious accidents from loss of stability!

Park the machine only on a flat, paved sur

face.

Secure the machine with wheel chocks

against rolling away. Position the wheel

chocks under the side of the tyres pointing to

the downward slope.

NOTE

Clean the machine and prepare properly

before parking it for an extended period; see

chapter

Care and Maintenance.

Park the machine in a shed or under a roof so

that no moisture can accumulate in hopper,

metering unit and seed hoses.

Park the machine unfolded or folded together

with the seed wagon, see

wings.

See operating instructions for the seed wagon.

Summary of Contents for Avatar 12.20 SW
































































Search results

Summary of Contents for Avatar 12.20 SW

Reviews:

Related manuals for Avatar 12.20 SW

Brands by name

Popular brands

horsch Avatar 12.20 SW, Operating Instructions Manual

Search results

Summary of Contents for Avatar 12.20 SW

Reviews:

Related manuals for Avatar 12.20 SW

Brands by name

Popular brands