horsch Avatar 12.20 SW, Operating Instructions Manual

Page: 31 / 63

Aluminium clips
The aluminium clips are placed on the piston
rods of hydraulic cylinders, depending on the
operating states, see chapter Operation .
Different aluminium clips
The thickness of the clips differs according to
colour:
Colour
blue red yellow black silver
Thick -
ness
7 mm 10 mm 19 mm 30 mm 50 mm
WARNING
Risk of injury on the hydraulic cylinders!
Limbs may be pinched or crushed by uninten-
tional retraction of the piston rods.
¾
Engage the parking brake of the tractor before
attaching or removing the clips. Secure the
machine with wheel chocks against rolling
away.
¾
Nobody may be about in the area of the tractor
cab at this time.
¾
Lock control units mechanically or electrically,
depending on the version.
¾
Make sure when placing or removing clips that
the control units are not operated by any other
person.
CAUTION
Danger of damage to the packer frame.
¾
Depending on the design, do not remove any
fixed clips or depth limitations!
NOTE
¾
Pay attention to the ratio on the machine, see
Depth setting .
27