14
© 2 0 0 5 D i r e c t e d E l e c t r o n i c s — a l l r i g h t s r e s e r v e d
H
H11//44 G
GR
RA
AY
Y (-) hood pin shutdown input
This wire must be connected to the hood pinswitch. This input
will disable or shut down the remote start when the hood is
opened.
Installing the hood pin switch requires drilling a ¼-inch hole in the
metal lip under the hood. Choose a location that will allow the pin
switch to be depressed when the hood is closed. The pin switch has
a spade connector on the bottom for the wire connection. Run this
wire into the passenger compartment and connect it to the
GRAY (H1/4) wire on the main harness.
important!
Do not use the vehicle until you confirm the
operation of the hood pin shutdown.
important!
Do not use the vehicle until you confirm the
operation of the brake shutdown.
