3
2
1
Lubrication
1
Fig.1
IMPORTANT – Only apply small single drops of light machine oil to the places indicated in red in Fig.2. This is best achieved by making a simple oil ‘dropper’ as illustrated in Fig.1. Insert a straightened paper clip into a cork and use a bottle
cap as a container for the oil. A small drop of oil can then be picked up by the dropper and applied in exactly the right place. Immediately wipe off any excess oil, especially from the locomotive body. Only lubricate moving parts.
Fig.5
Apply one drop of oil to each of the axle bearings indicated in red in
Fig.3, on both sides of the locomotive.
Fig.2
DCC Ready
If your locomotive is not pre-fitted with
a decoder, please see Fig.6 for location
of DCC socket.
Fig.3
Body Removal
Carefully ease the lower edge of the body away from the chassis, untill the
shallow clips are disengaged. (Figs 3 and 4) The body should now lift
easily away from the chassis as shown in Fig.5.
Fig.4
Fig.6
3
2
