8. Rotate the tube to align the holds of the tube with the openings
on the sleeres.
Swedged End
Swedged End
Swedged End
x4
2
2
2
2
2
2
2
2
2
2
4
4
6. Connect the
4
Tubes.
NOTE:
NOTE: Refer to the part list on page 6 for the
exact quantity of
4
Tubes. Connect half the
total quantity to form the horizontal beams on
the short sides of the pool.
7. Carefully slide the connected Short Tubes
4
into the sleeves on the short sides of the pool.
4
4
• Align the holes of
4
and
5
with the sleeve openings.
• Make sure all the swedged ends of
4
and
5
are pointing to the clockwise direction.
4
5
3
3
3
3
9. Connect the
3
Corner Piece to the takes at 4 Corner. A
closed rectanglar pool frame is now frame at the pool top.
NOTE: The Conner Piece
3
DO NOT have a hole to catch the
spring pin. THIS IS NORMAL. Only
4
5
Tubes have holes to
catch the spring pin.
2
10. Insert the
2
U-Shaped Pipe take to the strapes at the bottom of
the pool.
11. Continue to insert all
2
U-Shaped Pipe.
-
1
7
-
