27/04/2021
23
HZN01/MYN/334
15.1. Battery Upgrade
See Section 19 of this Manual for the battery sizes
available and instruction on fitting of replacement
batteries if ordered as an after market option.
15.2. Crutch/Stick Holder
The Crutch/Stick Holder secures to the chassis of
the vehicle by 2 x 8mm Sets with nylon locking nuts.
A pair of 13mm spanners is required to fit this item.
WARNING!
Always ensure that when using the Crutch/Stick
Holder that your crutches are secured by way of the
“hook and loop” strap so that they do not interfere
with you once seated on the scooter.
15.3. Rear Removable Locking Case
To fit the Locking Case the optional Accessory
Bracket is required.
WARNING!
Always ensure that you do not put more weight
than is stated for the case as this could make the
vehicle unstable or cause damage or injury due to
failure of the mounting system.
15.4. Sprung Suspension Seat
The Aztec has an optional ergonomically designed,
high back weatherproof seat with the fol-
lowing functions:
1.
Built
-
in Lap
-
Belt
2.
Angle adjustable Flip Up Armrests
3.
Adjustable angle Backrest
4.
“Dial
-
A
-
Weight” fully adjustable Seat Suspension
5.
Forward
-
Rearward adjustable Slide x 2
15.5. Oxygen Bottle Holder
To fit the Oxygen Bottle Holder you will require the
optional Accessory Bracket to be fitted.
WARNING!
Always ensure that you do not put more
weight than is stated for the holder or use a
bottle that is larger than permitted as this
could make the vehicle unstable or cause
damage or injury due to failure of the bottle or
mounting system.
15.6. Solid Road Tyres
Road tyres with solid (foam) tyres are available for
your scooter. These are designed to prevent the
possibility of punctures.
Solid ATV tyres are not available at this time.
WARNING!
The user, plus options and accessories, plus
items carried should never exceed the total
weight as listed in Section 9 of this manual
15. Options
Summary of Contents for Aztec 3 2021
Page 36: ...27 04 2021 36 HZN01 MYN 334...