27/04/2021
34
HZN01/MYN/334
24. Fault Codes on TruCharge Battery Display
The way in which the battery gauge should be read depends on whether the controller is driving, charg-
ing, in Sleep Mode or in Trip Mode. See Below.
24.1
TruCharge Indictor Steady
If the TruCharge gauge shows red, yellow and green, the batteries are charged.
If the TruCharge gauge shows red and yellow, then you should charge the batteries as soon as possible.
If the TruCharge gauge shows red then you should charge the batteries immediately.
24.2 TruCharge Indicator Flashing Slowly
The controller is functioning correctly, but you should charge batteries as soon as possible
Note:
Do not operate scooter if batteries are nearly discharged. Failure to comply may leave the user
stranded somewhere unsafe such as in the middle of the road.
24.3 TruCharge Indicator Stepping Up
The batteries are being charged
24.4 TruCharge Indicator Blinks every 3.5 seconds
The controller has entered Sleep Mode.
24.5 TruCharge Indicator Flashing Rapidly
The controller safety circuits have operated and is preventing the scooter moving.
•
Switch off the scooter.
•
Make sure all connections on scooter are mated correctly and tightly.
•
Check battery condition and for damage.
•
Switch scooter on again, if fault persists contact your Authorised Service Agent.
Summary of Contents for Aztec 3 2021
Page 36: ...27 04 2021 36 HZN01 MYN 334...
