Horizon Mobility Aztec 3 2021, Owner'S Manual

Page: 27 / 36

27/04/2021 27 HZN01/MYN/334
18.1. Warnings
DANGER !

Never try to inflate your tyres using a garage
forecourt air supply system, this could cause
severe personal injury or death due to over
inflation of your tyres.

Always remove your wheels using only the
centre wheel nut.

If changing a tyre or inner tube, never try to
separate the two halves of your wheel with
the tyre valve still inserted or the tyre inflated.
Always ensure to remove the tyre valve and
ensure the tyre is fully deflated before undo-
ing the wheel assembly fixings.

Always ensure you use the correct size and
type of tools when removing your wheel or
separating the wheel halves.

When replacing the front wheels never over
tighten the wheel nut as this will damage the
wheel bearings, always use the correct
torque. If in doubt seek expert advise.

18.2. Tyre Pressures
18.3. Wheels and tyres
If wheels are removed ensure that the axle shafts
are well greased before replacing wheels. Always
use the self - locking nuts provided with the scooter.
If lost contact your dealer for a new one as the
thread is not a standard metric one.
WARNING!
Never tighten the front wheel nuts beyond touching
the outer bearing as this will damage the bearings.
18. Wheels and Tyres
Minimum Maximum
Road Only Tyres (Tubeless) 20PSI - 1.38Bar 25PSI - 1.72Bar
ATV Front Off - Road Tyres 15PSI – 1.03Bar 20PSI – 1.38Bar
ATV Rear Off - Road Tyres 15PSI – 1.03Bar 20PSI – 1.38Bar