Page 4 of 4
3. The regulatory label on the final system must include the statement: “Contains FCC ID:
BRWX1TXP1UC” or using electronic labeling method as documented in KDB 784748.
4. The final system integrator must ensure there is no instruction provided in the user manual or
customer documentation indicating how to install or remove the transmitter module except such
device has implemented two
‐
ways authentication between module and the host system
IC Information to OEM integrator
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove this RF module in the user manual of the end product.
The user manual which is provided by OEM integrators for end users must include the following
information in a prominent location.
1. To comply with IC RF exposure compliance requirements, the antenna used for this transmitter
must be installed to provide a separation distance of at least 20 cm from all persons and must not
be co
‐
located or operating in conjunction with any other antenna or transmitter, except in
accordance with IC multi
‐
transmitter product procedures.
2. Only those antennas with same type and lesser gain filed under this IC number can be used with
this device.
3. The regulatory label on the final system must include the statement: “Contains IC: 6157A-
BRWX1TXP1UC “.
4. The final system integrator must ensure there is no instruction provided in the user manual or
customer documentation indicating how to install or remove the transmitter module except such
device has implemented two
‐
ways authentication between module and the host system.
CE Information
This product contains a radio transmitter with wireless technology
which has been tested and found to be compliant with the applicable
regulations governing a Class 1 wideband radio transmitter in the 2.400 GHz to 2.4835 GHz
frequency range.
