background image

 

Page 3 of 4 

FCC Information 

This device complies with part 15 of the FCC rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation. 

IC Information 

This device complies with Industry Canada license-exempt RSS standard(s).  Operation 
is subject to the following two conditions: (1) this device may not cause interference, and 
(2) this device must accept any interference, including interference that may cause 
undesired operation of the device. 

 

Caution:

 

Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate 

the equipment. 

 

 

4.5 This module meets the requirements for a mobile device that may be used at separation 
distances of more than 20cm from the human body. It may be used in hand-held controllers that 
provide a separation distance of at least 5cm between the antenna and the body (excluding 
hands/wrists). The instructions to the user for the host device must include information requiring 
the product be used in a manner to ensure the appropriate separation (20cm or 5cm) between 
antenna and body and requiring that the transmitter not be collocated with another transmitter. 
 

FCC Information to OEM integrator

 

The OEM integrator has to be aware not to provide information to the end user regarding how to 
install or remove this RF module in the user manual of the end product. 
The user manual which is provided by OEM integrators for end users must include the following 
information in a prominent location. 
1.To comply with FCC RF exposure compliance requirements, the antenna used for this 
transmitter must be installed to provide a separation distance of at least 20 cm from all persons 
and must not be co

located or operating in conjunction with any other antenna or transmitter, 

except in accordance with FCC multi

transmitter product procedures. 

2. Only those antennas with same type and lesser gain filed under this FCC ID number can be 
used with this device. 

Summary of Contents for X1TXP1UC

Page 1: ...mW EIRP Receive sensitivity up to 95dBm DSSS data rates up to 250kbps 1 mile operating range Full packet assembling and disassembling Auto transaction sequencer Fully buffered digital interface with high voltage tolerant inputs 2 Pin description Pin Number Name Description 1 GND Module Ground 2 VCE Power control monitoring 3 VIN Module DC Power 4 P21 Baseband CPU digital port P2 1 5 P33 Baseband C...

Page 2: ... Module User Requirements 4 1 This module must be integrated into a device where the user cannot access the antenna connector 4 2 Only a 2 0dBi antenna can be used with this module The antenna must meet and not exceed the gain and pattern of the supplied folded dipole antenna 4 3 The device must contain the following permanent labeling on the exterior of the device as follows Contains FCC ID BRWX1...

Page 3: ...a separation distance of at least 5cm between the antenna and the body excluding hands wrists The instructions to the user for the host device must include information requiring the product be used in a manner to ensure the appropriate separation 20cm or 5cm between antenna and body and requiring that the transmitter not be collocated with another transmitter FCCInformationtoOEMintegrator The OEM ...

Page 4: ...ents the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi transmitter product procedures 2 Only those antennas with same type and lesser gain filed under this IC number can be used with this device 3 T...

Reviews: