ADDITIONAL ITEMS REQUIRED TO COMPLETE THE VENTURE 30CP
1. RADIO SYSTEM REQUIREMENTS (NOT INCLUDED):
6-channel or greater R/C helicopter system with 120° CCPM function (see list below), 5 servos, 1000mAh receiver battery, and gyro
VENTURE
™
50 3D ARF FEATURES
CCPM (Cyclic/Collective Pitch Mixing):
More Accurate: Control system play is totally eliminated thanks to full ball bearings
and a high-grade swashplate
Simpler: Fewer links to set up and maintain
More Powerful: Collective has three times the servo power, cyclic has double
Special 3D Rotor Head Design
The Venture 50's updated 3D rotor head features an aluminum center hub, heavy
duty spindle shaft, 3D dampener set, and main blade holder thrust bearings to
handle the rigors of 3D flight like never before
High Quality Aluminum/Composite Swashplate
Improves control accuracy, eliminates the need for expensive Swashplate upgrades
Two-Piece Box Frame System
Provides excellent rigidity and vibration absorption
One-Way Hex Start Shaft System
Provides positive starting, starter shaft utilizes a one-way bearing that allows the
shaft to stop after the engine is started
Belt-Driven Tail Rotor Design with LSD Slipper Clutch
Provides easy adjustment and low maintenance, eliminates the need for
optional/expensive tube drive shafts. The added LSD clutch allows the Ventures tail
to be partially driven for aerobatic autorotations
Precision Ball Bearings at All Critical Locations
Provide low wear, high precision and reduced maintenance
Ultra-Low Parts Count
Adds reliability and ease of maintenance
Self-Aligning One-Piece Heavy Duty Steel Clutch System
Offers easy installation and adjustment with exceptional reliability
Rearward-Facing Engine Design
Provides easy access to the glow plug for starting, engine slips easily through the
main frame for trouble free engine maintenance
Dual Boom Braces
Offers increased rigidity of the tail assembly for increased gyro holding power. Also
eases glow plug access and replacement
Included Header Tank System
An industry First! Improves engine performance and consistency throughout the
entire flight. Increases flight times, and provided a fuel level visual during flight
Superior Parts Fit and Finish
Make assembly trouble-free and enjoyable
Optional 3D Control System Setup Included
Converts the Venture(tm) from a smooth and predictable 3D trainer to an all out
extreme 3D machine with the use of the included aggressive 3D paddles and
Swashplate ball spacers for ultra aggressive 3D flight
4
CCPM-Ready JR Radio Systems
Most current JR Heli radio systems (XP662,
XP8103 w/digital trims, 10X, as well as older
10 series systems) are equipped with 120°
CCPM electronics for use with the JR CCPM
machines. Radios you may be flying now, like
the X347, X388S, XP783, and XP8103* have
CCPM capability built in, but require
activation by the Horizon Service Department.
Please call (217) 355-9511 for details.
*Please note that many XP8103 systems have the CCPM
function already activated. Please check with the Horizon
Service Center for details.
CURRENT RADIO SYSTEMS
JRP1656** PCM 10X, 5-8231 Servos (50/53/72 MHz)
JRP165TX PCM 10X, Transmitter Only (50/53/72 MHz)
JRP8622** XP8103FM, 5-517 Servos (50/53/72 MHz)
JRP8653** XP8103PCM, 5-531 Servos (50/53/72 MHz)
JRP7425** X-378 FM 5-537 Servos (72MHz)
JRP6822** XP662 FM, 5-537 Servos (72MHz)
3'' Servo Extensions (2)
G500T Gyro
JR AirPac
™
JR XP662
JR X-378
JR 10X
JR XP8103 DT