8
5. Leave the throttle trigger at the neutral position, then press
and release the Set button. The red LED will stop flashing, the
green LED will flash one time and the motor will make a tone
to indicate the neutral position has been accepted.
6. Hold the throttle trigger at the full throttle position then
press and release the Set button. The green LED will flash
twice and the motor will make two tones to indicate the full
throttle position has been accepted.
7. Hold the throttle trigger at the full brake position then press
and release the Set button. The green LED will flash three
times and the motor will make three tones to indicate the
full brake position has been accepted.
The motor will operate normally after calibration is completed.
Power on your transmitter
Connect battery to the esc
and switch on the esc
Hold set key for one second
Green led flashes
To reset all programming items,
press and hold the set button
for five seconds
Button Programming
