16
SPEKTRUM DX3R USER GUIDE
17
SPEKTRUM DX3R USER GUIDE
Model coPy
01: Model 01
Model
Select:
Name:
Model 01 ◊
Copy To:
02: Model 02
≤
to access the
Model coPy functIon
In the Model screen use the roller to highlight
the Copy To function. A box will surround the
Copy To function.
Press the roller to access the Copy To function.
The box will now be flashing, indicating the Copy To
function has been selected.
Use the roller to select the desired model that you
choose to copy to (models 01 thru 30).
When the desired model that you intend to copy to is
selected, press the roller. The screen will appear as
follows.
Confirm
Copy
01: Model 01
to
02: Model 02
NO
YES
≤
If the selected model is correct, use the roller to
highlight YES and press the roller to copy from the
current model to the selected model.
Note
: The model memory of the selected model
will be replaced with the current model’s model
memory, thus erasing the copy to the model’s
memory.
To return to the Main screen, press and hold the roller
for more than three seconds.
travel
User Name
01: Model 01
L 100%
R 100%
H 100%
L 100%
H 100%
L 100%
ST
TH
AX
Travel
≤
The Travel screen (sometimes referred to as travel
adjust or endpoints) allows independent travel
adjustment of the servo throw in each direction of
all three channels (steering, throttle and auxiliary). A
graphic illustration displays the effect of travel adjust.
to access the travel functIon
From the list screen rotate the roller to highlight the
Travel function.
Press the roller to enter the Travel function. The Travel
screen will be displayed as shown above.
Rotate the roller to highlight the desired channel that
you wish to adjust the travel of.
ST= Steering
TH= Throttle and brake
AX= Auxiliary channel 3
Press the roller to enter the highlighted channel’s
travel function (see monitor Page 28).
01: Model 01
Steering
100% 100%
Travel
≤
Rotate the roller to highlight the values at the
bottom of the screen; then press the roller to
select the values.
Rotating the roller will now adjust both the right and
left values simultaneously. If you desire to adjust
the right or left directions independently, then move
the corresponding channel’s wheel, throttle stick or
trigger. The trimmer that the Aux channel is assigned
to and that value alone will be highlighted (e.g.
turning the steering wheel to the right will highlight
the right value only and subsequent adjustment will
affect the right travel only).
Note
: The DX3R features “sticky gooey.”
When the corresponding channel is moved
in the desired position as illustrated above
and released, the value on that side remains
highlighted. Moving the channel in the opposite
direction will then highlight the opposite
direction’s value. This allows convenient
independent travel adjustments without having to
hold the wheel or trigger in the desired position.
To highlight both values again after moving the
wheel in one direction, simply press the roller
once with the wheel centered and both values
will be highlighted.