28
SPEKTRUM DX3R USER GUIDE
29
SPEKTRUM DX3R USER GUIDE
MonItor
User Name
01: Model 01
ST +129
TH +0
AX +0
Monitor
≤
A servo monitor is available that displays the
servo output positions graphically and digitally.
This monitor can be useful in troubleshooting setups,
displaying mixing functions and how they interrelate,
etc.
to access the MonItor functIon
In the List screen use the roller to highlight the
Monitor function.
Press the roller to access the Monitor function. The
above screen will appear and real-time servo output
positions will be displayed.
To return to the Main screen press and hold the roller
for more than three seconds.
systeM
System
Switch Select
A B C D E F
Username
◊
Contrast: 10
RF Mode: STD
Voltage Alert
4.0v
User Name
≤
The System function allows the six available switches
(A,B,C,D,E and F) to be programmed to the desired
function. It allows the user name to be selected,
contrast to be adjusted, and the voltage alarm
threshold to be set.
swItch select
The Switch select function allows any of the six
available switches (A, B, C, D, E and F) to be assigned
one of the following functions:
Switch
User Name
01: Model 01
A- Thr Trim +
B- Str Trim +
C- Aux Lin +
D- Str S/R +
E- Brake +
F- Timer
≤
Inhibit
Switch/button turned off
Aux 3P
Channel three functions as a three-
position output
Aux 2P
Channel three functions as a two-
position output
Aux Lin-
Channel three functions as a
linear output
Brake
Full brake trim
Thr Exp
Throttle exponential
Thr Trim
Throttle trim—adjusts the neutral
throttle position
S/R Override Steering override
Str Exp
Steering exponential
Str S/R
Steering rate
Str Trim
Steering trim
Timer
Activates up or count down timer
to PrograM a swItch or button
Highlight the desired switch/button and press the
roller. Use the roller to select the desired function from
the list above.
Note
: A po or negative – value is
available for many of the above functions
allowing the reversing of the switch direction.
user naMe
A user name with up to ten characters can be
programmed and the name displayed on the
Main screen.
to PrograM a user naMe
In the System screen highlight the User Name and
press the roller to access the function.
System
Switch Select
A B C D E F
Username
◊
Contrast: 10
RF Mode: STD
Voltage Alert
4.0v
Racer X
≤
Use the roller to select the position, then press the
roller to access the character.
Contrast is adjustable from 0 to 30. Highlight
the Contrast function then scroll the roller to
adjust the contrast.
The Voltage Alert sets the voltage threshold at which
the alarm sounds. The default setting is 4.0 volts,
however, if you wish to change this setting, highlight
the Voltage Alert function and press the roller.
Scrolling the roller will allow the voltage threshold to
be adjusted from 0.0 to 6.5 volts.
rf Mode
STD is the standard RF mode. FR is the France RF
mode and should only be selected if the transmitter is
used in France.
